“12小时日晒防紫外线防水黄色带灯薄膜开关”参数说明
是否有现货: | 否 | 认证: | ISO |
类型: | 凸起 | 材料: | 砂面聚酯PET |
结构: | 面版打凸触感型 | 电路形成方式: | 导电印料印刷电路 |
环境: | 常用 | 型号: | FF080-01 |
规格: | 76*69mm | 商标: | Flexkys |
包装: | 纸箱包装 | Carbon paste: | Acheson ELECTRODAG 423SS |
Silver paste: | Acheson 820B | Insulation ink: | Acheson ELECTRODAG 452SS |
产量: | 100000 |
“12小时日晒防紫外线防水黄色带灯薄膜开关”详细介绍
面板 防紫外线Autotex XEV150 印刷:防紫外线油墨 背胶 3M55280 防水 按键:凸起 结构:单层结构,面板背面印银浆点 LED:3个绿灯,1个红灯 接头:2.54mm,需要壳套 尾线长:85mm 圆形凸起,LED显示窗口是透明窗口;
“12小时日晒防紫外线防水黄色带灯薄膜开关”其他说明
Materials | |||
Part | Ordinary Material | ||
Finish | Specification | ||
Graphic Overlay | PC | Gloss | 0.175/.25/.35/.5 mm thickness |
Matt | 0.175/.25/.35/.5 mm thickness | ||
PET | Fine Texture | 0.15/.20 mm thickness | |
Valet Texture | 0.15/.20 mm thickness | ||
Gloss with Hard Coat | 0.18 mm thickness | ||
Top Adhesive | PET Double-sided adhesive | 0.10/.22/.28 mm thickness | |
Paper Double-sided Tape | 0.10 mm thickness | ||
Transfer Tape | 0.06/.12 mm thickness | ||
Retainer | PET | Gloss | 0.125 mm thickness |
Spacer | PET Double-sided Tape | 0.225/.275 mm thickness | |
Circuit Layer | PET | Gloss | 0.1/.125 mm thickness |
Rear Adhesive | Paper Double-sided Tape | 0.10 mm thickness | |
Transfer Tape | 0.06/.12 mm thickness | ||
Connector | Pin | Metal,Male/Female 2.54mm | |
House | Female,2.54mm | ||
Conductive Layer | Silver Paste | Acheson ELECTRODA 820B | |
Carbon Paste | Acheson ELECTRODA 423SS | ||
Insulation Ink | Acheson ELECTRODA 452SS | ||
Electrical Performances | |||
Wire Resistance | 0.5mm width,≤1Ω/cm | Rated Current | 25-100mA,0-30V DC |
Insulation Resistance | >100MΩ 250V DC | Working Voltage | <50V DC |
Working Life | >500k times | Working Temperature | -30℃-70℃ |
Working Humidity | 40℃,98%RH | Withstand Voltage | 1500V DC |
Feedback Time | 10ms | Tail Folding | R>1,180 |
QC Standards | |||
Overlay Printing | Spelling mistake | Not allowed | |
Incorrect Font | Not allowed | ||
Dimension error | >0.2mm is Not allowed | ||
Color | Less than 2 levels with the specified Pantone color | ||
Dot impurities | Diameter less than 0.2mm. Distance between two impurities is more than 50mm.The number of impurities is less than 2 within 100cm² | ||
Linear impurities | Width is less than 0.2mm,length is less 0.4mm in panel surface. Distance between two impurities is more than 50mm | ||
Window impurities | Diameter is less than 0.2mm in the center of the window | ||
Circuit layer Printing | Routing error | Not allowed | |
Circuit Line width | >0.2mm is not allowed | ||
Position offset | >0.2mm is not allowed | ||
The key size deviation | >0.2mm is not allowed | ||
Dot impurities | Diameter less than 0.4mm. Distance between two impurities need be more than 20mm.The number of impurities is less than 3 within 100cm² | ||
Linear impurities | Width is less than 0.3mm, length is less than 1mm. Distance between two impurities is more than 50mm. Impurities can not across two lines.The number of impurities is less than 3 within 100cm² | ||
Loose | Not Allowed | ||
Askew | Obvious, Not Allowed | ||
Appearance |
Product layered, the edge cracking |
Not allowed | |
Stains | Not allowed | ||
Damage | Not allowed | ||
Performance | Life of single button | With usual operation method, more than 500K times | |
Service life of the switch | In the standard environment and operation method, it is more than 1 year |